
Braze documents four ecommerce Canvas templates: abandoned browse, abandoned cart, abandoned checkout, and order confirmation with a feedback survey. Each one ships with a trigger, a delay, exit criteria and entry rules already set. The results depend on how the four hand over to each other and which defaults you keep.
Key Takeaways
- Braze documents four ecommerce Canvas templates: abandoned browse, abandoned cart, abandoned checkout, and order confirmation with a feedback survey.
- The first three share a Place Order conversion event and a 3 day conversion deadline. Order confirmation uses Start Session with a 10 day deadline.
- When a shopper starts checkout, the cart is tagged
checkout_startedand they leave the cart Canvas. - The
abort_if_not_abandonedsetting defaults to true, so the checkout message is aborted for shoppers who have already bought. - We recommend giving each shopper stage one owning Canvas and treating exit criteria as the real design work.
- Braze publishes no recovery rate for these templates, so measure your own with a control group.
What are the Braze ecommerce automation use cases worth building first?
Braze documents four ecommerce Canvas templates: abandoned browse, abandoned cart, abandoned checkout, and order confirmation with a feedback survey. They map to four moments on one path. A shopper looks at a product, adds it to a basket, starts checkout, and finally buys.
Each moment gets its own Canvas, so each message can match what the person has actually done. As a Braze implementation partner, we treat the four as a single programme and not four separate projects.
The templates are the fastest route to a working first version. The thinking goes into the seams between them.
Our suggestion is to build them in the order the shopper meets them, then go live with checkout and cart first. We recommend that order because those audiences have shown the strongest intent.
How do the four templates differ at a glance?
The table sets out the defaults the Braze documentation lists for each template. Treat every value as a starting point to review against your own purchase cycle.
| Template | Entry trigger | Delay step | Exit criteria | Re-entry |
|---|---|---|---|---|
| Abandoned browse | View product | 1 hour | View product, Update cart, Start checkout, or Place Order | After the full Canvas duration |
| Abandoned cart | Update cart | 4 hours | Update cart, Start checkout, or Place Order | Immediately re-eligible |
| Abandoned checkout | Start checkout | 4 hours | Place Order | After the full Canvas duration |
| Order confirmation and feedback survey | Place Order | None listed | Not applicable | After the full Canvas duration |
The first three share a conversion event of Place Order and a conversion deadline of 3 days. The order confirmation template differs, because its conversion event is Start Session and its conversion deadline is 10 days.
Every template targets users where Email available is true, and sends to users who are subscribed or opted in. The documentation also says you can modify the entry audience criteria to meet your business needs.
What does the abandoned browse flow do?
Use the abandoned browse template to engage users who have browsed products but did not add them to their cart or place an order. It triggers when a user performs View product, then waits 1 hour.
This is the broadest and lowest-intent audience of the four. We expect it to be the largest audience, because any shopper with an email address who views a product can qualify. Our suggestion is to keep this message light and hold stronger incentives for later flows.
Exit criteria include viewing another product, updating the cart, starting checkout or placing an order. A shopper who moves down the path therefore leaves the browse Canvas on their own.
How does abandoned cart hand over to abandoned checkout?
When a user adds an item to their cart, they enter the Canvas. Each time they add or update items, they re-enter, which keeps their cart data and messaging up to date.
Once the shopper starts checkout, their cart is tagged as checkout_started and they exit the Canvas. Any future cart updates using the same cart ID will not trigger re-entry, because the cart has already moved into the checkout stage.
From there, the abandoned checkout Canvas targets the shopper instead, because it is designed for users further along in the purchase journey. Our suggestion is to test this with your own cart IDs before you add extra suppression rules for one basket.
Abandoned cart uses a shopping_cart Liquid tag for product personalisation. The same tag appears in the checkout template.
Why does the abort_if_not_abandoned setting matter in checkout?
The abandoned checkout template uses the shopping_cart tag with a parameter called abort_if_not_abandoned. If you omit the parameter or set it to true, Braze aborts the message for users who have already completed their purchase.
The documentation also gives the other option. Set it to false when you want to send the checkout reminder regardless of whether the cart is still considered abandoned at send time. That is a deliberate choice, and the default protects shoppers who have already bought.
We recommend keeping the default of true for almost every reminder. A nudge to finish a purchase that is already complete reads as a mistake. Switch it to false only when the email still has a job to do for a completed order, and write the copy so it makes sense either way.
How should you sequence the four flows together?
The documentation states that Canvas steps can move users only forward in the flow. A Canvas cannot loop a person back to an earlier step.
That forward-only rule shapes how we think about the four templates. We recommend that each Canvas owns one stage and hands the shopper on. That makes the exit criteria the real design work.
When two flows could claim the same shopper, decide in advance which one owns them and make the other one exit.
Here is the worked example. This is a hypothetical scenario, not client work, and it uses no figures.
Imagine a retailer that launches all four templates on the same day with default settings. A shopper views a jacket, adds it to the basket, then leaves. The cart Canvas fires first, and the shopper later starts checkout, so they leave the cart Canvas and enter the checkout Canvas.
Now imagine the shopper buys a different jacket from the one they abandoned. The checkout Canvas, on its default exit criteria, sees a Place Order event and exits them. The original jacket reminder never arrives, even though that item is still unbought.
That may be exactly right for a retailer selling one item at a time. It may be wrong for a retailer whose shoppers buy several items across several orders.
The documentation covers this case.
In an abandoned checkout Canvas, you can configure a user to exit only when they purchase the exact item they abandoned. They keep receiving reminder messages if they purchase a different item.
The decision is whether a different purchase should end the reminders. It belongs to the business before it reaches the Canvas builder.
How do you match exit criteria to the item the shopper abandoned?
The Braze guide on matching exit criteria to entry events compares a property on the exit event with the same property stored at entry. If the two match, the user exits. If they differ, the user stays and keeps receiving reminders.
It describes an alternative using an Action Paths step. A user who has not completed a purchase first receives an abandoned checkout message. They are then held for one week and sorted into three pathways: completed the original purchase, made a different purchase, or did not purchase.
The Action Paths pattern suits retailers who want a different follow-up for each outcome, such as a cross-sell for the buyer and a stronger reminder for the person who did not buy. We recommend starting with the exit-criteria pattern because it is simpler to build and to audit.
The guide says the configurations in it are illustrative examples, and that you should test all components in your development environment before launching. Property names and data types must match between your entry events and your exit logic.
What should the order confirmation flow measure?
The order confirmation and feedback survey template triggers on Place Order. Its conversion event is Start Session, with a conversion deadline of 10 days.
Our reading is that this makes it a post-purchase experience measured by whether the customer returns, not a revenue recovery flow measured by orders. We recommend reporting it separately from the three abandonment flows. A return-visit conversion inside a revenue dashboard makes the whole programme harder to read.
Braze also describes a conversions dashboard you can create once a Canvas uses the "Places Order" conversion event. It describes a Revenue - Last Touch Attribution dashboard too. Use these for the abandonment flows.
How do you test and launch the programme safely?
Start with a control group. The Canvas best practices say to determine the impact of your Canvas messaging by incorporating control groups. Without one, you cannot tell whether the flows earned the orders that followed them.
The documentation does not give a recovery rate for any of the four templates, so this post states none. Measure your own.
We recommend launching the flows one at a time, starting with checkout. Leave a gap between launches so any change in results traces back to one flow.
If you need to change a live Canvas, the best practices advise a clean approach. When in doubt, stop the Canvas, duplicate it, and relaunch for a clean re-evaluation.
Teams using the new Shopify connector get ecommerce recommended events automatically through the integration. The documentation says the legacy purchase event will enter a deprecated state (maintenance mode). New builds should use the recommended events.
All four flows depend on events such as View product and Update cart reaching Braze. If that data feed is the weak point, our Braze technical integration work covers connecting SDKs, APIs and other sources.
How does this connect to the rest of the programme?
These flows sit alongside the rest of your automation. Our guide to using templates for faster marketing automation in Braze covers how to adopt and adapt Braze's starting points more broadly.
Entry choices matter just as much as the templates, so read automated triggers in Braze, action-based or API-triggered before you finalise entry rules. For the failure modes that hurt any automated email, see six failure modes to plan for in Braze email automation.
Order confirmations often overlap with transactional messaging, which we cover in how to automate transactional emails with Braze. Wider habits are in marketing automation best practices for Braze users, and Braze use cases by company size shows how scope changes as a business grows.
For a retail example of lifecycle automation in practice, see our case study on re-engaging lapsing retail customers, which covers building an interactive reward into automated lifecycle messaging.
As a Braze implementation partner, CustomerIK recommends treating the four ecommerce templates as one programme. Give each shopper stage a single owner, review every default delay and exit rule against your own purchase cycle, and launch with a control group in place.
Frequently Asked Questions
1. How many ecommerce Canvas templates does Braze offer?
Braze offers four: abandoned browse, abandoned cart, abandoned checkout, and order confirmation with a feedback survey.
2. Will a shopper get both an abandoned cart and an abandoned checkout message for the same basket?
Not by default. When the user starts checkout, their cart is tagged as checkout_started and they exit the cart Canvas. The checkout Canvas then targets them instead.
3. What does abort_if_not_abandoned do?
It controls whether the checkout message is aborted for users who have already completed their purchase. If you omit it or set it to true, Braze aborts the message for those users.
4. Can I keep sending reminders if the shopper buys a different item?
Yes. The Braze guide on matching exit criteria describes exactly that. A user exits only when they purchase the item they abandoned, and they keep receiving reminders if they buy a different item.
5. Does Braze publish recovery rates for these templates?
The pages we reviewed document configuration only and give no recovery rate, so this post states none.
Sources
- Braze, How to use eCommerce recommended events. Retrieved 14 Nov 2026.
- Braze, Matching exit criteria to entry events. Retrieved 14 Nov 2026.
- Braze, Canvas best practices. Retrieved 14 Nov 2026.
- This post rests on three Braze documentation pages, which describe configuration and give no performance figures.
- Written by CustomerIK, a Braze implementation partner.
CustomerIK is a Braze implementation partner working across onboarding, technical integration, marketing operations and customer data management.
If your abandoned cart and checkout flows overlap and you want a second pair of eyes on the exit rules, let's talk.




