
Personalization analytics in Braze means proving that a tailored message changed customer behaviour, not just that it was sent. The documented route is a randomized control group, a primary conversion event chosen before launch, and a read of uplift and confidence by variant. Funnel reports, retention reports and Report Builder then show where the effect lands and how long it lasts.
Key Takeaways
- A randomized control group gives the baseline for what happens when no message is sent.
- The primary conversion event is the first one you add, and Braze uses it to select the best-performing variant.
- A control group makes opens and clicks a poor way to pick a winner, because the control group can't open or click.
- Analyze Variants shows uplift against the control variant and confidence, and confidence appears only when a control group exists.
- Conversion metrics are not listed for Tags in Report Builder, so uplift is read at campaign or Canvas level.
- A multivariate test can't be changed once it begins, so agree the control group, conversion event and tag names first.
What does personalization analytics mean in Braze?
Braze presents results through campaign analytics, Canvas analytics, funnel reports, retention reports and Report Builder. Personalization is measured by designing the test well and then reading those reports in the right order. Each part answers a different question.
The question that matters is whether the personalized message changed what the customer did, compared with what they would have done anyway. A send count or a list of merged fields can't answer that. Only a comparison against a group that received nothing can.
Which control group shows whether personalization worked?
Braze lets you reserve a percentage of the target audience as a randomized control group. Users in the control group don't receive the test, but Braze monitors their conversion rate for the duration of the campaign. That gives you a baseline for what happens without a message.
Variants on their own only compare one message with another. A personalized variant that beats a generic one tells you which copy to keep. It doesn't tell you whether either message beat sending nothing, and that is the number a business case needs.
| Comparison | What it answers | What you need |
|---|---|---|
| Personalized against generic | Which message to keep | Two variants |
| Personalized against control | Whether the message beat sending nothing | A control group |
| Generic against control | Whether the baseline message earns its place | A control group |
Assignment is documented as pseudo-random. Braze combines the user ID with the campaign or Canvas ID, takes the modulus of that value with 100, and slices users by the percentages you chose.
Which conversion event should a personalization test measure?
The primary conversion event is the first event you add during campaign or Canvas creation. Braze uses it to select the best-performing variant and to set the window in which revenue is calculated. The first event you add therefore carries more weight than any that follow.
We recommend choosing it before you build any variant, and picking a behaviour the personalization is meant to change. A product recommendation block should be judged on purchases or product views, not on session starts.
A user counts as converted if they performed the event in the window, even if they never opened or clicked the message. That is why a conversion count alone proves little. The control group is what turns it into evidence.
Why shouldn't opens and clicks decide a personalization test?
Braze says that using a control group when determining a winner by Opens or Clicks is not recommended. The control group receives no message, so its members can't open or click, and its conversion rate is 0% by definition. The comparison is empty.
In our view, subject-line and first-name tailoring show up in opens first. A winner picked on opens tells you the line was more attractive. It doesn't tell you whether the customer then did what you wanted, so use opens as a diagnostic and conversion as the decision.
How do you read a personalization result in Canvas analytics?
On the Canvas details page, select Analyze Variants. The tab shows performance by variant and control group. It lists conversion totals and rates for each conversion event, uplift against the control variant and statistical confidence.
Confidence is the statistical measure of how certain Braze is that a difference is real and not random chance. It appears only when a control group exists. Braze runs a separate test to label a winner, using Pearson's chi-squared tests at 95% significance, so a variant can beat the control without being the winner.
Our suggestion is to read a Canvas result in this order:
- Confirm the audience filter matches the channel, so the control group isn't diluted by users who couldn't have received the message.
- Confirm the primary conversion event is the one the personalization was meant to move.
- Read uplift against the control variant before comparing variants with each other.
- Check confidence for each conversion event, and wait for the planned test duration.
- Pick a winner only after the first four steps agree.
How do funnel and retention reports extend the picture?
Funnel reports show the journey after a customer receives a message. With a control group or multiple variants, you can see how each variant affected the funnel at a more granular level. A user leaves the funnel at the first step where they don't perform the next event in the sequence you configured.
Personalization can change the route before it changes the rate. A tailored block might lift product views and leave purchases flat, and only the funnel will show that.
The retention report adds the longer view. It measures a retention event over 30 days from receipt, and its control group data shows retention without a message.
Funnel reports aren't available for API campaigns, and retention reports aren't available for API-triggered campaigns.
How do you compare personalization across campaigns in Report Builder?
Report Builder compares results across multiple campaigns or Canvases in a single view. Metrics and drilldowns are customizable. Under General, you can select Tags to include each message's tags in your report rows, and Tags are also an option in the Rows dropdown.
Our suggestion is to tag every message by personalization depth, for example none, profile fields, behavioural, or catalogue-driven, and to agree the tag names before anything launches. Tags then let you group reports by depth rather than by campaign name.
There is a documented boundary to plan around. Conversion metrics are listed as available for Campaigns, Canvases, and Campaigns and Canvases, while Entries and Total Revenue are also available for Tags. Multivariate metrics are available only when you report on Canvases, or Campaigns with a Variant drilldown.
A tag-level view therefore gives you entries and revenue, and the uplift comparison stays at campaign or Canvas level. If your team wants help building the reporting layer around these tests, CustomerIK's marketing analytics service covers BI layer design, attribution modelling and executive dashboards.
What goes wrong when you measure personalization in Braze?
The failure modes below are documented, and each one has a clear fix. They are the ones we would check for first.
An unfiltered audience is the first. If a push campaign goes to a wide audience with a control, the control includes users without a push token. The initial audience must filter for having a push token (Foreground Push Enabled is true), and the same applies to opted-in and subscribed states on other channels.
Editing mid-test is the second. After a multivariate test begins you can't make changes to the campaign, and an edit once sending has started invalidates the experiment and removes its results. Braze recommends avoiding message edits within an hour of launch.
Conversion counting is the third. Multichannel campaigns can record a separate conversion opportunity for each messaging channel, which can produce conversion rates greater than 100% against unique recipients. With re-eligibility enabled, users can convert again with each send, while funnel reports convert a maximum of one time.
Segment confounding is the fourth. The success of a message says something about both the message and its target segment, so a personalized variant tested on a loyal segment can flatter itself.
Sample size matters too. As a guide, you likely need approximately 15,000 users per variant, including the control, to reach 95% confidence, so check a sample size calculator for your own case.
What does a worked example look like?
Take a hypothetical retailer that wants to know whether recommending the last browsed category in a weekly email earns its build effort. It sets purchases as the primary conversion event and reserves a control group. It builds two variants with identical subject lines, one generic and one category-aware, sent to the same segment at the same time.
The first read is category-aware against control. If uplift appears but confidence is low, the retailer waits for the planned duration. Braze advises setting a test duration upfront and not ending the test early.
Then it compares the two variants. If generic matches category-aware, the extra data dependency isn't earning its place and the simpler build stays.
A funnel report comes last. It shows whether the category-aware version lifted product views without lifting purchases, which would point at the landing page rather than the personalization. This scenario is illustrative only, isn't client work, and carries no figures.
How does this connect to the rest of the programme?
Measurement only works if the personalization is sound first. Our guide to common personalization pitfalls in Braze covers what to fix before you test, and personalization strategy from planning to execution covers the sequencing around it.
For the build side, see using Liquid tags for personalization and real-time personalization and what resolves when. For the reporting side, our post on advanced reporting strategies goes further on dashboards, and the post on measuring Decisioning Studio with a holdout group applies the same control logic to an AI decisioning programme.
A case study on unifying guest profiles for a global hotel group covers cross-property personalization and systematic multivariate testing in the same programme.
As a Braze implementation partner, CustomerIK recommends agreeing the control group, the primary conversion event and the tag names before the first personalized message is built. Braze documents that you can't make changes to a campaign once a multivariate test begins, so the first two are settled early, and agreed tag names keep later reports comparable. The Braze documentation on A/B testing is the place to confirm current behaviour.
Frequently Asked Questions
1. Does Braze have a personalization report?
Braze presents results through campaign analytics, Canvas analytics, funnel reports, retention reports and Report Builder. You measure personalization by designing a test with variants and a control group, then reading those reports.
2. How many users does a personalization test need?
As a guide, around 15,000 users per variant including the control, to achieve 95% confidence. The exact number could be higher or lower for your case, so check a sample size calculator.
3. Can I pick the winner by opens or clicks?
Braze says that using a control group when determining a winner by Opens or Clicks is not recommended, because the control group can't open or click. Use a conversion event instead.
4. Can I edit a message while the test runs?
After a multivariate test begins you can't make changes to the campaign. Editing a message once sending has started invalidates the experiment and removes its results.
5. Are funnel and retention reports available for API campaigns?
Funnel reports aren't available for API campaigns, and retention reports aren't available for API-triggered campaigns.
Sources
- Braze, Create multivariate and A/B tests. Retrieved 09 Nov 2026.
- Braze, Multivariate and A/B test analytics. Retrieved 09 Nov 2026.
- Braze, A/B tests. Retrieved 09 Nov 2026.
- Braze, Conversion events. Retrieved 09 Nov 2026.
- Braze, Canvas analytics. Retrieved 09 Nov 2026.
- Braze, Report Builder. Retrieved 09 Nov 2026.
- Braze, Reports. Retrieved 09 Nov 2026.
- Braze, Retention reports. Retrieved 09 Nov 2026.
- Braze, Funnel reports. Retrieved 09 Nov 2026.
- Written by CustomerIK, a Braze implementation partner.
CustomerIK is a Braze implementation partner working across onboarding, technical integration, marketing operations and customer data management.
If you want a control group, a conversion event and a tag scheme agreed before your next personalized campaign, let's talk.




