
A/B testing push notifications in Braze means sending different versions of one push campaign to randomised groups of users. You then read which version drove the action you care about. The result is only as good as the setup, so change one variable, choose a push-enabled audience, fix the duration, and agree the conversion event before launch.
Key Takeaways
- Change one variable per test, so a winning result points to a cause you can name.
- Filter the audience for users where Foreground Push Enabled is true before you add a control group.
- Braze gives around 15,000 users per variant, including the control, as a guide to reach 95% confidence.
- Set the test duration upfront, and leave the campaign alone once it is running.
- Judge the winner on conversion when you use a control group, because control users can't open a message they never received.
- The release notes entry dated 25 Jun 2026 lists the push behaviour of Optimize with BrazeAI as early access.
How do you run A/B testing for push notifications in Braze?
A Braze test sits inside an ordinary campaign. You build the push and add variants. Then you choose a segment, split it across the variants and an optional control group, and launch.
The Braze documentation on creating A/B tests says you can create up to eight variants. A push campaign can target iOS and Android devices together.
The setup is the same whether you change one thing or several. An A/B test examines the effect of changing one variable, whereas a multivariate test examines two or more. Here is the order we follow:
- Write the hypothesis and name the single element that differs between variants.
- Create the push campaign and add the variants.
- Filter the audience for users who can receive push.
- Split the audience across variants and decide whether to hold back a control group.
- Set the conversion event and the test duration.
- Launch, then leave the campaign alone until the duration ends.
What can you vary in a push A/B test?
Braze lists the levers for push in its testing guidance. The results it points to are opens and conversion rate.
| Lever | What you change | Result to read |
|---|---|---|
| Copy | The words of the title and message | Opens, conversion rate |
| Image and emoji usage | Whether an image or emoji is used | Opens, conversion rate |
| Deep links | Where the tap leads | Opens, conversion rate |
| Presentation of numbers | Example in the guidance: "triple" versus "increase by 200%" | Opens, conversion rate |
| Presentation of time | Example in the guidance: "ends at midnight" versus "ends in 6 hours" | Opens, conversion rate |
We read the two results differently. An open tells you the message was noticed, while a conversion tells you the message did its job.
For a deep link test, judge on conversion. The open happens before the user reaches the screen you changed.
Why should the first push test change one variable?
More variants mean fewer users in each one. Braze states that tests with more variants need a larger test group to reach statistical significance.
Fewer users see each individual variant. If you keep missing 95% confidence, the documentation suggests a larger sample or fewer variants.
A single change also gives you a result you can name. Suppose a variant wins and it differs in copy, image and deep link.
You know the bundle worked but not which part. Start with one change, then test the next lever in a follow-up.
Once the test is running, leave it alone. If you change a test's parameters after it starts, Braze considers the experiment compromised and disables it. If the experiment has already started sending and you edit the message, the results are removed.
Who should be in the push test audience?
Push reaches only users with a push token, and that creates a trap when you use a control group. Braze describes it directly. The test group sends messages only to users with a push token.
The control group includes users who have one and users who don't. The fix is to filter the initial audience for users where Foreground Push Enabled is true.
Without that filter, the control group converts at a different rate for reasons unrelated to your message. You would be comparing push recipients against a mixed group, and any difference would be partly an audience artefact.
The segment matters as well. A message that works for recently active users may not work for lapsed ones.
The result describes both the wording and the audience. Our guide to push notification segmentation covers how to build segments worth testing on.
How large and how long should a push test be?
Braze gives a guide of around 15,000 users per variant, including the control, to reach 95% confidence. It also says the exact number could be higher or lower depending on your case.
Multiply the per-variant figure by the number of groups. Compare it with your segment size before you add a third variant.
The docs do not give a push-specific sample size or a minimum duration. They do say to set a duration upfront and not end the test early, even if early results look promising.
They also note that push can produce significant results faster than email. Users see pushes immediately, while an email may wait days to be opened.
In practice, pick the duration by thinking about when your users act on this particular message. A push about a same-day offer and one about a monthly feature update have very different response windows. The same duration will not suit both.
How does Braze decide the winning push variant?
Braze tests all the variants against each other with Pearson's chi-squared tests. These measure whether one variant outperforms all others at a significance level of p < 0.05, which Braze calls 95% significance. This is a separate test from the confidence score, which compares a variant with the control on a scale from 0 to 100%.
A test that misses 95% still teaches you something. The documentation points out that all of your variants may have had roughly the same effect.
Knowing that saves you the time you would have spent making those changes. For us, a flat result is a finding about the lever: this wording does not move this segment.
For single-send campaigns, Optimize with BrazeAI sends an initial test and then sends the best-performing variant to the remaining audience. For multi-send campaigns it reviews performance every 12 hours.
The release notes entry dated 25 Jun 2026 lists the push behaviour as early access. Check current status before you plan around it.
Should a push A/B test have a control group?
A control group gives you a baseline. Users in it don't receive the test, and Braze monitors their conversion rate for the duration of the campaign. Confidence only appears in your results if you have a control group.
There is one pairing to avoid. Braze recommends against using a control group when determining a winner by opens or clicks.
Control users can't open or click a message they never received, so their rate is 0% by definition. Choose conversion as the winning metric when you use a control group.
Rate limiting is the second thing to decide early. The FAQ states that rate limiting is not supported with an A/B test that has a control group.
The limit doesn't apply to the control in the same way as to the variants. Decide which one the test needs before you build it.
What does a push test look like in practice?
Imagine a hypothetical retailer app that sends a weekly sale push to shoppers who haven't opened it for a while. The team's hypothesis is that a deadline framed as a countdown outperforms a deadline framed as a clock time. It writes two variants that differ only in that phrase, "ends at midnight" and "ends in six hours".
The team filters the audience to users who can receive push and includes a control group. It names a purchase as the conversion event, so the winner is judged on conversions and not opens. It writes the duration down before launch and doesn't touch the campaign afterwards.
If neither variant reaches 95% confidence, the team records that the phrasing does not move this segment. It tests the deep link destination next. If one variant wins, the team reruns the test on a more engaged segment.
That matches the Braze suggestion to run a follow-up test on a different segment of users. This example is illustrative. It is not client work and uses no CustomerIK delivery data.
How does this connect to the rest of the programme?
A test result is only useful if you can read it and act on it. Our guide to analysing push notification performance covers the metrics you will compare across variants. The same principles for email are in our post on A/B testing email campaigns.
Timing and personalisation are two further levers you can test. See optimising push notification timing and personalising push notifications for those. For re-engagement tests, Braze suggests comparing the long-term impact of variants with Retention Reports.
Our retention metrics guide explains what to track. For a view of how testing sits inside a larger programme, see our case study on a platform migration for a multi-brand rewards programme, which includes A/B testing in the work it describes.
As a Braze implementation partner, CustomerIK recommends writing the hypothesis, the conversion event and the duration down before anyone builds a variant. Every later argument about the result goes back to those three decisions.
Frequently Asked Questions
1. Can you A/B test push notifications in Braze without a control group?
Yes. Confidence only appears in your results if you have a control group. Without one, you compare variants against each other and lose the baseline.
2. How many variants can a Braze push campaign have?
Braze documents up to eight variants per campaign. More variants need a larger audience, so keep the number of variants low.
3. What happens if you edit a push after the test starts?
Braze considers the experiment compromised and disables it if you change its parameters. If it has already started sending and you edit the message, the experiment is invalidated and its results are removed.
4. Does Braze choose the winning push variant automatically?
With Optimize with BrazeAI, a single-send campaign sends an initial test and then the best-performing variant to the remaining audience. For push, the release notes list this as early access as of 25 Jun 2026.
5. Should you measure opens or conversions in a push test?
Braze lists both as results to look for. If you include a control group, use conversion, because control users can't open a message they never received.
Sources
- Braze, Create multivariate and A/B tests. Retrieved 04 Nov 2026.
- Braze, Multivariate and A/B test analytics. Retrieved 04 Nov 2026.
- Braze, Multivariate and A/B test FAQ. Retrieved 04 Nov 2026.
- Braze, A/B tests. Retrieved 04 Nov 2026.
- Braze, Optimizing A/B tests. Retrieved 04 Nov 2026.
- Braze, Release notes. Retrieved 04 Nov 2026.
- Written by CustomerIK, a Braze implementation partner.
CustomerIK is a Braze implementation partner working across onboarding, technical integration, marketing operations and customer data management.
If you want a second pair of hands on your first push test design, let's talk.




